Conference proceedings

The conference proceedings are published online and open access in the Procedia Engineering (Volume 175) series by Elsevier publishers. Below you can find the table of contents with all publications for download. The full proceedings are available at the journal's homepage.

Procedia Engineering, Volume 175, Pages 1–372 (2017)

Proceedings of the 1st International Conference on the Material Point Method (MPM 2017)
10–13 January 2017, Delft, The Netherlands
Edited by Alexander Rohe, Kenichi Soga, Hans Teunissen, Bruno Zuada Coelho

Abstract

This volume of the Procedia Engineering series contains the proceedings of the 1st International Conference on the Material Point Method (MPM 2017, Delft, The Netherlands, 10–13 January 2017). Many abstracts were received and, of these, 49 papers were accepted for inclusion in these conference proceedings. Authors presented their work in one of the conference’s technical sessions.

Preface

The Anura3D MPM Research Community is delighted to present you the proceedings of the 1st International Conference on the Material Point Method for “Modelling Large Deformation and Soil–Water–Structure Interaction” held in Delft (The Netherlands) on 10–13 January 2017. This is the first conference following a series of international workshops and symposia previously held in Padova (2016), Barcelona (2015), Cambridge (2014) and Delft (2013) within the European Community’s Seventh Framework Programme Marie–Curie project MPM–DREDGE.
The aim of the conference is to provide an international forum for presenting and discussing the latest developments in both the fundamentals and applications of state-of-the-art computational methods that can be effectively used for solving a variety of large deformation problems in geotechnical and hydraulic engineering. Special focus is on the numerical modelling of the interaction between soils, water and structures where the interface and state transition between solid and fluid behaviour plays an essential role.
The peer reviewed papers contained in these proceedings have been authored by academics, researchers and practitioners from many countries in Europe and worldwide. The papers cover numerous important aspects related to the numerical modelling of large deformations and soil–water–structure interaction, ranging from the recent mathematical developments of the material point method, across benchmark examples up to real engineering applications.
The editors would like to acknowledge the Scientific and Review Committees for their assistance in the review process. They would also like to thank the authors, participants and sponsors.
On behalf of the Organising Committee, the Anura3D MPM Research Community and the partners of the MPM–DREDGE project, we welcome you to The Netherlands and hope that you find the conference both enjoyable and inspiring.

Alexander Rohe, Kenichi Soga, Hans Teunissen, Bruno Zuada Coelho
January 2017

Table of Contents

Alexander Rohe, Kenichi Soga, Hans Teunissen, Bruno Zuada Coelho, Editorial MPM 2017 Conference, Procedia Engineering, Volume 175, 2017, Pages i-iv, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.000

Michael Cortis, William M. Coombs, Charles E. Augarde, Scott Robinson, Michael Brown, Andrew Brennan, Modelling Seabed Ploughing Using the Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 1-7, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.002.

Yousef G. Motlagh, William M. Coombs, An Implicit High-order Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 8-13, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.003.

Elliot J. Fern, Kenichi Soga, Granular Column Collapse of Wet Sand, Procedia Engineering, Volume 175, 2017, Pages 14-20, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.005.

Jakob Maljaars, Robert J. Labeur, Matthias Möller, Wim Uijttewaal, A Numerical Wave Tank Using a Hybrid Particle-mesh Approach, Procedia Engineering, Volume 175, 2017, Pages 21-28, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.007.

Chuanqi Liu, Qicheng Sun, Yi Yang, Multi-scale Modelling of Granular Pile Collapse by Using Material Point Method and Discrete Element Method, Procedia Engineering, Volume 175, 2017, Pages 29-35, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.009.

Xue-Ying Jing, Wan-Huan Zhou, Yangmin Li, Interface Direct Shearing Behavior Between Soil and Saw-tooth Surfaces by DEM Simulation, Procedia Engineering, Volume 175, 2017, Pages 36-42, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.011.

Joshua Poganski, Helmut F. Schweiger, Günter Kargl, Norbert I. Kömle, DEM Modelling of a Dynamic Penetration Process on Mars as a Part of the NASA InSight Mission, Procedia Engineering, Volume 175, 2017, Pages 43-50, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.013.

Dmitry A. Tyurin, Alexander L. Nevzorov, Numerical Simulation of Long-term Peat Settlement Under the Sand Embankment, Procedia Engineering, Volume 175, 2017, Pages 51-56, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.014.

Shyamini Kularathna, Kenichi Soga, Projection Method in Material Point Method for Modeling Incompressible Materials, Procedia Engineering, Volume 175, 2017, Pages 57-64, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.016.

Eric Antoinet, Hadrien Buffiere, Kristina Kovalcikova, Time Dependent Earthquake Modeling of an Earth Dam, Procedia Engineering, Volume 175, 2017, Pages 65-71, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.025.

Vahid Galavi, Lars Beuth, Bruno Zuada Coelho, Faraz S. Tehrani, Paul Hölscher, Frits Van Tol, Numerical Simulation of Pile Installation in Saturated Sand Using Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 72-79, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.027.

Irene Redaelli, Francesca Ceccato, Claudio di Prisco, Paolo Simonini, Solid-fluid Transition in Granular Flows: MPM Simulations with a New Constitutive Approach, Procedia Engineering, Volume 175, 2017, Pages 80-85, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.028.

Alfred Septian, Marcelo A. Llano-Serna, Marc R. Ruest, David J. Williams, Three-dimensional Kinematic Analysis of Bingham Canyon Mine Pit Wall Slides, Procedia Engineering, Volume 175, 2017, Pages 86-93, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.030.

Krishna Kumar, Kenichi Soga, Jean-Yves Delenne, Farhang Radjai, Modelling Transient Dynamics of Granular Slopes: MPM and DEM, Procedia Engineering, Volume 175, 2017, Pages 94-101, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.032.

Huaxiang Zhu, Wan-Huan Zhou, Xue-Ying Jing, Zhen-Yu Yin, Numerical Study of the Formation of Shear Bands in Soil under Interface Shearing, Procedia Engineering, Volume 175, 2017, Pages 102-109, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.034.

Tim J. Charlton, William M. Coombs, Charles E. Augarde, Gradient Elasto-plasticity with the Generalised Interpolation Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 110-115, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.036.

Fursan Hamad, Shreyas Giridharan, Christian Moormann, A Penalty Function Method for Modelling Frictional Contact in MPM, Procedia Engineering, Volume 175, 2017, Pages 116-123, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.038.

Lei Wang, William M. Coombs, Charles E. Augarde, Michael Brown, Jonathan Knappett, Andrew Brennan, David Richards, Anthony Blake, Modelling Screwpile Installation Using the MPM, Procedia Engineering, Volume 175, 2017, Pages 124-132, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.040.

Xuanyu Zhao, Dongfang Liang, Mario Martinelli, Numerical Simulations of Dam-break Floods with MPM, Procedia Engineering, Volume 175, 2017, Pages 133-140, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.041.

Saeid Nezamabadi, Thanh H. Nguyen, Jean-Yves Delenne, Julien Averseng, Xavier Frank, Farhang Radjai, MPM with Frictional Contact for Application to Soft Particulate Materials, Procedia Engineering, Volume 175, 2017, Pages 141-147, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.044.

Gianluca Zorzi, Matthias Baeßler, Fabio Gabrieli, Influence of Structural Stiffness on Ratcheting Convection Cells of Granular Soil under Cyclic Lateral Loading, Procedia Engineering, Volume 175, 2017, Pages 148-156, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.046.

Wen-Chia Yang, Greg Miller, Pedro Arduino, Peter Mackenzie-Helnwein, An Enhanced Smoothing Algorithm for MPM to Stabilize Hydrodynamic Impact Problems with Embedded Solids, Procedia Engineering, Volume 175, 2017, Pages 157-164, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.047.

Hans Teunissen, Cor Zwanenburg, Modelling Strains of Soft Soils, Procedia Engineering, Volume 175, 2017, Pages 165-174, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.049.

Wen-Chia Yang, Krishnendu Shekhar, Pedro Arduino, Peter Mackenzie-Helnwein, Greg Miller, Modeling Tsunami Induced Debris Impacts on Bridge Structures using the Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 175-181, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.050.

Francesca Ceccato, Lars Beuth, Paolo Simonini, Adhesive Contact Algorithm for MPM and its Application to the Simulation of Cone Penetration in Clay, Procedia Engineering, Volume 175, 2017, Pages 182-188, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.004.

Zhuang Jin, Zhen-Yu Yin, Panagiotis Kotronis, Yin-Fu Jin, Numerical Analysis of a Suction Bucket Penetrating in Sand with a Combined Lagrangian – SPH Approach, Procedia Engineering, Volume 175, 2017, Pages 189-196, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.006.

Lorenzo Brezzi, Simonetta Cola, Fabio Gabrieli, Giacomo Gidoni, Spreading of Kaolin and Sand Mixtures on a Horizontal Plane: Physical Experiments and SPH Numerical Modelling, Procedia Engineering, Volume 175, 2017, Pages 197-203, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.008.

Mario Martinelli, Faraz S. Tehrani, Vahid Galavi, Analysis of Crater Development Around Damaged Pipelines Using the Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 204-211, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.010.

Richard R. de Jager, Arash Maghsoudloo, Amin Askarinejad, Frans Molenkamp, Preliminary Results of Instrumented Laboratory Flow Slides, Procedia Engineering, Volume 175, 2017, Pages 212-219, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.012.

Majid Goodarzi, Mohamed Rouainia, Modelling Slope Failure Using a Quasi-static MPM with a Non-local Strain Softening Approach, Procedia Engineering, Volume 175, 2017, Pages 220-225, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.015.

Ilaria Iaconeta, Antonia Larese, Riccardo Rossi, Eugenio Oñate, An Implicit Material Point Method Applied to Granular Flows, Procedia Engineering, Volume 175, 2017, Pages 226-232, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.017.

Marco Bolognin, Mario Martinelli, Klaas J. Bakker, Sebastiaan N. Jonkman, Validation of Material Point Method for Soil Fluidisation Analysis, Procedia Engineering, Volume 175, 2017, Pages 233-241, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.018.

Dongfang Liang, Xuanyu Zhao, Mario Martinelli, MPM Simulations of the Interaction Between Water Jet and Soil Bed, Procedia Engineering, Volume 175, 2017, Pages 242-249, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.019.

Farzad Fatemizadeh, Dieter F. Stolle, Christian Moormann, Studying Hydraulic Failure in Excavations Using Two-phase Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 250-257, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.020.

Phil J. Vardon, Bin Wang, Michael A. Hicks, Slope Failure Simulations with MPM, Procedia Engineering, Volume 175, 2017, Pages 258-264, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.021.

Roel Tielen, Elizaveta Wobbes, Matthias Möller, Lars Beuth, A High Order Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 265-272, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.022.

Jakub Konkol, Lech Bałachowski, Numerical Modeling of Cone Penetration Test in Slightly Overconsolidated Clay with Arbitrary Lagrangian-Eulerian Formulation, Procedia Engineering, Volume 175, 2017, Pages 273-278, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.023.

Markus Bürg, Liang Jin Lim, Ronald Brinkgreve, Application of a Second-order Implicit Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 279-286, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.024.

Francesco Castelli, Gabriele Freni, Valentina Lentini, Antonio Fichera, Modelling of a Debris Flow Event in the Enna Area for Hazard Assessment, Procedia Engineering, Volume 175, 2017, Pages 287-292, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.026.

Quoc-Anh Tran, Wojciech Solowski, Minna Karstunen, Leena Korkiala-Tanttu, Modelling of Fall-cone Tests with Strain-rate Effects, Procedia Engineering, Volume 175, 2017, Pages 293-301, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.029.

Alexander Chmelnizkij, Sparsha Nagula, Jürgen Grabe, Numerical Simulation of Deep Vibration Compaction in Abaqus/CEL and MPM, Procedia Engineering, Volume 175, 2017, Pages 302-309, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.031.

Djamila Bouayad, Assessment of Sandy Soil Variability Based on CPT Data, Procedia Engineering, Volume 175, 2017, Pages 310-315, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.033.

Bruno Zuada Coelho, Alexander Rohe, Kenichi Soga, Poroelastic Solid Flow with Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 316-323, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.035.

Leon Gonzalez Acosta, Phil J. Vardon, Michael A. Hicks, Composite Material Point Method (CMPM) to Improve Stress Recovery for Quasi-static Problems, Procedia Engineering, Volume 175, 2017, Pages 324-331, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.037.

Núria Pinyol, Mauricio Alvarado, Ferran Parera, Alba Yerro, Novel Procedure to Validate MPM Results by Means of PIV Measurements, Procedia Engineering, Volume 175, 2017, Pages 332-340, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.039.

Mario Martinelli, Alexander Rohe, Kenichi Soga, Modeling Dike Failure using the Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 341-348, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.042.

Elizaveta Wobbes, Lars Beuth, Cornelis Vuik, Dieter Stolle, Modeling of Liquefaction using Two-phase FEM with UBC3D-PLM model, Procedia Engineering, Volume 175, 2017, Pages 349-356, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.043.

Youkou Dong, Dong Wang, Mark F. Randolph, Runout of Submarine Landslide Simulated with Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 357-364, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.045.

Alba Yerro, Alexander Rohe, Kenichi Soga, Modelling Internal Erosion with the Material Point Method, Procedia Engineering, Volume 175, 2017, Pages 365-372, ISSN 1877-7058, DOI: 10.1016/j.proeng.2017.01.048.

Contact:
Anura3D MPM Research Community
Conference Secretariat MPM 2017
c/o Deltares, P.O. Box 177, 2600 MH Delft, The Netherlands
Visiting address: Boussinesqweg 1, 2629 HV Delft, The Netherlands
info@anura3d.com